008617513275220
With the improvement of the quality of compound feed and the continuous development of the formula in a more scientific direction, especially the production of feed additive premix feed, the mixing equipment is selected correctly, and the mixing uniformity will be higher. Feed additive mixing equipment selection is uniform to ensure! The application of feed additives involves many materials with different proportions and large particle size differences, such as trace element additives, minerals, drugs, etc., which need to be evenly mixed with other materials in the mixing equipment.
Feed additive mixing equipment discharging method: the powder material adopts the pneumatic big door structure, which has the advantages of fast discharging and no residue. Small type mixing equipment adopts direct reducer connection mode, simple structure, high reliability and easy maintenance. The large mixing equipment is driven by a cycloidal reducer driven by a belt pulley, and the elastic connection of the belt drive has the advantage of protecting the transmission components when overloaded.
Feed additive mixing equipment in the specified time to complete mixing, a short time to clear to ensure the uniformity of the material; For example, with the side mouth or the bottom of the small opening spiral tape gradually put clean.
The use of feed additive mixing equipment should pay attention to the order of feeding. Generally, aniseed is first cast, such as corn meal, soybean meal, etc., and then cast group feed, such as premix. Note that the premix does not need to be fed by the screw elevator, and the one-time tipping bucket feeding is applied, or the manual feeding is used, which can avoid the segregation and loss of the active ingredients in the premix.
The feed additive mixing equipment causes the flow of various Spaces of some materials in the mixing, the liquid materials and the surrounding materials, forming a moving complex, and the result is a circulating flow separation composed in the barrel, and the diffusion between the resulting powders is called the convection and diffusion of the main powder.
Feed additive mixing equipment is used to stir dry and powdery materials to achieve the purpose of mixing evenly. When mixing, the material inside is moved by two rotors moving in opposite directions to carry out compound movement, and the internal full-size mixing component rotates with feed additive powder along the inner wall of the mixing equipment's barrel groove two clockwise and opposite clockwise, and the material near the axis rotates. In this way, the mixer with multiple forces of convection, diffusion, cross mixing, gravity throwing and shear mixing can achieve uniform powder mixing.
english
豫公網(wǎng)安備 41010302003023號
